Step by Step Process in Painting Exterior Walls

Painting exterior walls can result in the best outcomes once the right steps are followed. People who love to maintain their house and get the job done by themselves will certainly enjoy painting exterior walls. They'll experience a fun day scraping, sanding and preparing the walls before they'll climb ladders and mix paint. This is actually the step-by-step process in painting exterior walls.

Scrape the Walls

The exterior walls where you can find chipping old paint should be scraped so that the peeling paint will undoubtedly be removed. Seal the crevices and cracks with spackling compound or painter's caulk. Then, sand the walls using 100-grit sandpaper until you will be able to achieve smoothness on the wood.

Use Mild Soap and Water to clean the House

You can make use of a pressure sprayer in washing the house; however, you need to be sure that you don't dig grooves into your wood. Rinse off the soap and allow the wood to dry totally.

Apply Primer Coats

You can apply as many primer coasts as you necessary using a wide brush. It is advisable to follow the instructions distributed by the manufacturer.

Apply the Pain

In applying the paint, you will need to start from the most notable down starting at your fascia boards and eaves. The whole fascia and eaves perimeter must be painted before you begin on your walls.

Start the Wall Painting

Begin with a wall area from the most notable with the utilization of long horizontal strokes together with your brush. Begin in an area which does not have paint on it and apply the paint toward the region which you painted. This process ought to be repeated and soon you have applied the initial coat. Always follow  外壁塗装  of the maker on the next coats.

In painting exterior walls, it is necessary to wear safety glasses continuously. You can even wear something to protect your lungs when you sand the walls. Allow spackling compound or painter's caulk dry totally before you start sanding. This will ensure that there will be a great covering around your trim. Once you have poured paint into a bucket, ensure that the paint's lid can be sealed tightly. You can drive a 6d finish nail and make holes around the paint's rim will assure proper seating of the lid that may preserve your paint in the end. Finally, it isn't a good idea to stroke until your brush will undoubtedly be out of paint because this can bring about uneven coats.